Dwyer Visi-Float Flowmeters

Features

• Exceptionally tough
• Available in 2 or 4 inch scales
• Brass or stainless steel valve and connections available

Specifications

• Meter Body: Acrylic plastic. Metering tube machined into body
• Wetted Metal Parts: Stainless steel AISI 304, bright annealed
• Floats: Stainless steel, black glass aluminum, or K-Monel
• Float Stop: Stainless steel springs

Pipe Connections

• VFA and VFB: 1/8 in. NPT (1/4 in. NPT on VFB 85 and 86)
• O-rings: Buna-N
• Pressure Rating: 100 PSI Max.

Temperature Rating

• VFA and VFB: 150° Max.

Accuracy

• Model VFA: 5% of full scale
• Model VFB: 3% of full scale

Model VFA Dimensions

• Dimensions: 4-3/16 in. H x 1 in. W x 1-1/4 in. D
• BV or SSV (open): 2-1/16 in.

Model VFB Dimensions

• Dimensions: 6-11/16 in. H x 1-3/8 in. W x 1-1/4 in. D
• BV or SSV (open): 2-1/16 in.

Many more options are available for the Visi-Float Flowmeter. Please reference the Part builder in the 2011 Amron International Catalog - Page 86, found in the Attachments tab, or call Amron's award winning sales staff at (760) 208-6500 for a quote today!

Visi-Float® Series Flowmeters are available from Amron in a broadselection of flow ranges and direct reading scales for air, gas or water.

Visi-Float® Acrylic Flow meters are exceptionally tough. They are designed for use at pressures up to 100 PSI and temperatures up to 150°F. Do not exceed these limits! Flowmeters should not be exposed to strong chlorine atmospheres or solvents that may be destructive to the acrylic body.

Visi-Float® Flow meters must be mounted in a vertical position with the inlet connection at the bottom and outlet at the top. They can be mounted to a panel, in front of a panel supported by piping only, or mounted directly in rigid piping.