- Feathering On/Off Valve controls blow speed, making startup and initial underwater tool placement easy for the commercial diver
- Diaphragm-Type Accumulator design provides for trouble free operation and added punch with reduced recoil
- Will handle system back pressures up to 250 psi
- Accepts standard 1-1/8 inch hex tool bits and 1-1/4 inch hex tool bits
- Flush-face quick disconnect couplers are sold separately. For couplers, please purchase 1 set of Part Number 03971 Quick Disconnect Couplers
Stanley Hydraulic Underwater Breaker part number BR67320 Includes
- 12in. Pigtail Hose Whips (All tools require 2): Part Number 01652
- User Manual
- Input flow range: 7 - 9 gpm (26 – 34 lpm) at the commercial diver
- Input pressure: 1500 - 2000 psi (105 – 140 bar)
- Maximum back pressure: 250 psi (17 bar)
- Optimum flow: 8 gpm (30 lpm)
- Steel capacity: 1-1/8 in. x 6 in. hex, 1-1/4 in. x 6 in. hex
- Weight: 67 lbs (30 kg)
- Length: 27 in. (68 cm)
- Width (at handles): 16 in. (41 cm)
- Porting: 8 SAE O-Ring
- Connector: 3/8 in. male pipe hose end
Note: Stanley suggest cleaning the sintered filter installed inside the valve cap assembly after every dive. To clean the filter, Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.
The Stanley Hydraulic Underwater Breaker BR67 is medium duty underwater tool used by commercial divers for work in the 70-90 foot per pounds per blow impact class. This underwater tool is highly productive in underwater utility construction. This is primary used by commercial divers underwater for coral/barnacle removal, driving anchors, and breaking rock underwater.
The Stanley Hydraulic Underwater Breaker BR67 comes with hose whips. Quick disconnect couplers are sold separately.
The Stanley Easi-Ride™ foot, offered on the Stanley Hydraulic Underwater BR67 Breaker, absorbs and controls tool-bit bounce, greatly reducing commercial diver fatigue.
The Stanley Hydraulic Underwater Breaker BR67 has a Feathering On/Off Valve which controls blow speed, making startup and initial underwater tool placement easy.
The Stanley Hydraulic Underwater Breaker BR67 has a Diaphragm Accumulator which provides trouble-free operation for the commercial diver with system back pressures up to 250 psi (17 bar). The Stanley Hydraulic BR67 Underwater Breaker operates on opencenter systems and is available in 1-1/8 in. and 1-1/4 in. chuck hex sizes.
*Please see ACCESSORIES tab for service tools, toolbits, and accessories for the Stanly Hydraulic Underwater Breaker BR67.
*Please see PARTS tab for the list of parts associated with this underwater tool.
*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool. Available files for download are listed below:
- BR67 Accessories
- BR67 Users Manual
- BR67 Blowapart and Key
Brand Stanley Tools Video No