Ordering Information (Please contact your Amron Representative for connectors not listed)In-Line ConnectorLocking SleevesDummy PlugsFemale SocketMale PinFemale*Male*Female High Pressure (For use up to 20000 PSI) (44,000 ft./13000m)Male Low Pressure (For use up to 4000 PSI) (9,000 ft./2,7000 m)Male High Pressure (For use up to 20000 PSI) (44,000 ft./13000 m)RMG-2-FS-WOCRMG-2-MP-WOCG-FLS-D/SG-MLS-D/SRMG-2-FSD-HPRMG-MPD-LPRMG-2-MPD-HPRMG-3-FS-WOCRMG-3-MP-WOCG-FLS-D/SG-MLS-D/SRMG-3-FSD-HPRMG-MPD-LPRMG-3-MPD-HPRMG-4-FS-WOCRMG-4-MP-WOCG-FLS-D/SG-MLS-D/SRMG-4-FSD-HPRMG-MPD-LPRMG-4-MPD-HP
- Material: Special Neoprene, Molded
- Contacts: Copper Alloy, Hard Gold Plated per ASTM-B-488
- Voltage Rating: 600 VDC-contact factory for higher voltage requirements
- Pressure Rating, Mated: up to 20,000 psi
- Max Amps: 5.6
- No Cable - This series is for the Connector only without cable.
* D=Delrin, S=Stainless Steel
SEA CON® Marsh & Marine® RMG Series Waterproof Connectors are the industry standard for Kirby Morgan Helmets, Masks, and Diver Umbilicals. Other typical uses are for underwater cameras, lighting systems, and instrumentation. The Marsh Marine connectors are universally mateable to most major brands in this category.
Male in-line connectors allow for in-line mated sets not requiring bulkhead penetration. In addition, the WOC (without cable) type connectors allow for field installation in the event that a connector is damaged while at sea and needs replacing, or for long cable lengths that make cable transportation cost prohibitive. This is also ideal when installing to a non-neoprene cable. A few WOC connectors are an essential item for any commercial diver’s tool box. Replacements are easy. Simply pull back the protective sleeve, solder the cable wires to the appropriate contacts and pull the sleeve back into place. Bonding is achieved by using polyurethane molding compounds with appropriate primers.
The time proven Rubber Molded Series is one of the most inexpensive lines and has been used on all types of underwater instrumentation including: underwater lighting, communications, ROV's, thermistor arrays, hydrophone arrays, and all types of sonar systems. The contacts are gold plated per ASTM-B-488 and the series is rated up to 20,000 psi in a mated condition.
To purchase the coresponding Locking Sleeves please reference the "Parts Tab" below.
For products not listed in the pull down menu, including right angle connectors, please contact Amron International to inquire about these items and to receive a quote.
Please reference the "Documents Tab" below for printable Manufacturer Technical Data.
Brand SEACON Video No