- Inflates in approximately six seconds when totally submerged in water
- Auto-actuated CO2 cartridge (two required, sold separately) for primary inflation
- Manual pull system as a secondary inflation
- Oral inflation tube as a third inflation source
- Available with Overt (Yellow Bladder) and Covert (Black Bladder) options
- Corrosion Resistance: All parts are corrosion resistant in fresh and salt water
- Rot Resistance: All fabric, webbing, and binding are rot resistant
- Provides 45 lbs positive buoyancy in seawater at a depth of 33 ft., 57 lbs of positive flotation at a depth of 15 ft., and 80 lbs of flotation on the surface
- Consists of independent left and right hand units
- Welded flotation bladder
- Inflation system
- Pouch closure system
- Firing handle
Note: CO2 Cartridges are sold separately, see Accessories tab for details.
The Peci Flotation Automatic Tactical Flotation Support System (ATFSS)™ automatically inflates in approximately six seconds when totally submerged in water and has a back-up manual lanyard system in the unlikely event auto inflation does not occur. The Peci Flotation Automatic Tactical Flotation Support System is ideal for small boat operations, training events and recreation. The Peci Flotation Automatic Tactical Flotation Support System was designed to provide the same buoyancy as the popular TFSS-5326 which is 45 lbs positive buoyancy in seawater at a depth of 33 ft., 57 lbs of positive flotation at a depth of 15 ft., and 80 lbs of flotation on the surface, allowing today\'s war fighter a maximum load-out of equipment.
Each Peci Flotation Automatic Tactical Flotation Support System consists of one each independent left and right hand units, which can be mounted on a belt. Each unit includes a welded flotation bladder, an inflation system, a pouch closure system, a pouch, and a firing handle. The bladder is a reusable welded fabric enclosure that deploys under the arm and is readily collapsed and stowed for future use. The inflation system utilizes an auto-actuated CO2 cartridge for primary inflation, a manual pull system as a secondary inflation source and an oral inflation tube as a third inflation source.
The Peci Flotation Automatic Tactical Flotation Support System pouch uses a unique nylon zipper closure system designed to separate upon inflation. This method prevents accidental pouch opening and allows for the smallest unit size when fully packed (approx 6.5 in. x 2.75 in. x 2.25 in.). A durable Cordura flap to further protect against damage and inadvertent actuation covers the entire closure mechanism.
The Peci Flotation Automatic Tactical Flotation Support System pouch contains and protects the bladder, inflation system, and closure system. It includes a waist belt loop and clip loops to secure the pouch to the webbing belt. A firing handle attaches to the outside of each pouch and uses color-coded beads to help distinguish left and right hand units. The handle serves to release the closure system and actuate the CO2 inflation system if the auto system fails.
To manually actuate an Peci Flotation Automatic Tactical Flotation Support System unit, the user pulls upward on the firing handle. This motion initiates two sequential actions. First the manual inflator lever is actuated, causing the firing pin to puncture the seal on the CO2 cartridges to release the gas and completely fill the bladder. This action then separates the nylon zipper and deploys the filled bladders. Should this CO2 inflation system fail to operate, the bladder can also be filled through an oral inflation tube. This is accomplished by depressing the Oralock valve, then breathing into the tube. Gas is released from the Peci Flotation Automatic Tactical Flotation Support System bladder by pressing downward on the Oralock valve and forcing the air out the oral inflation tube. Once all of the gas is evacuated from the bladder, the CO2 cartridges are replaced, maintenance is performed, and the units are repacked for future use.
CO2 cylinders sold separately. See Accessories tab for details.
Brand PECI Video No