Stanley Tools GTR20B02 GTR Hydraulic Power Unit

• All electric control system with rotary switches
• All components are assembled for easy routine servicing
• Upper frame can be removed for more serious servicing
• Quartz hour meter in the control panel records engine run time
• The hydraulic pump is mounted directly to the engine eliminating any misalignment and ensuring long life of the drive coupling
• In-tank hydraulic filter continuously cleans the hydraulic fluid and assures that refill fluid passes through the filter for a clean refill
• 35-Ah sealed, non-spillable, no-maintenance battery is located inside a covered compartment
• Moving the GTR around is made easy with a lift-and-latch handle
• Pressure lubrication system with a pressure sensing switch that will shut down the engine if engine oil level is too low

Specifications

• Output Capacity: 2 ea. 5 GPM/1 ea. 10 GPM (2 ea. 20 LPM/1 ea. 40 LPM)
• Pressure: 2000 PSI (140 bar)
• Circuit Type: Open Center
• Hydraulic Tank Capacity: 3 gallons (11 liters)
• Fuel Tank Capacity: 7 gallons (26.5 liters)
• Weight (Wet): 330 lbs (150 kg)
• Dimensions: 35 in. L x 21.5 in. W x 29 in. H (89 cm L x 54.6 cm W x 73.7 cm H)
• Engine: Briggs and Stratton 18 Horsepower Vanguard

The Stanley GTR20B02 GTR Hydraulic Power Unit is a small compact hydraulic power unit designed to provide power for underwater hydraulic tools requiring 5 gpm/20 lpm up to 10 gpm/40 lpm. The Stanley Hydraulic Power Unit GTR20 is dual circuit and powered by a Briggs & Stratton industrial grade engine. Folding and locking handle, electric start, computer throttle control, pressurized engine lubrication, and large pneumatic tires are standard equipment