-
Call Us
(877) 462-6700
(760) 208-6500
-
Don't want to call?
-
Service Questions
- Overview
-
Features
Air Control
- High Pressure Side
- Two high pressure air supply connections with two color coded, 6ft SCUBA yokes and whips. The whips and yokes remain attached to the lid of the unit during storage or transit.
- Each input has a color coded shut off valve and an air pressure gauge which allows the tender to change out the air bottles in the system.
- As an added safety feature, check valves on each input provide protection against back flow of air from a full bottle to the empty in case the tender forgets to close the valve when switching bottles.
- A high quality Tescom adjustable, non-venting regulator reduces the high pressure air to low pressure air. The pressure reducing regulator input is protected against contamination by a 50 micron filter and a 0-400PSIG air pressure gauge monitors the output air pressure. A relief valve (factory set at 285PSIG) limits over pressurization.
- Low Pressure Side
- Input check valve permits simple switching to back-up high pressure air in the event of low pressure air failure. Back-up high pressure air supply can simply be turned on. Commercial diver umbilical air connection is an oxygen type fitting, controlled by a quarter turn ball valve which permits unrestricted flow.
Communications- The 2810E 1 diver air communicator comes complete with a hand-held push-to-talk microphone which cancels top side background noise and provides clear communication to the commercial diver.
- The communicator has individual volume controls for the commercial diver and tender which provides for individual preferences of volume. Dynamic 20 watt 'voice power' insures clear hardwire communications even under difficult conditions.
- MP3 Player Input - Connects to an external audio signal for diver entertainment
- The radio has AC power with battery back-up power. The system can also be powered from an external 12V source or the 110/220 volt battery charger. A red LED battery condition indicator also functions for external power sources.
Pneumo System- The Pneumo System measures the commercial diver's depth by supplying air pressure to the pneumo hose.
- The heart of the pneumo system is the high precision 6 inch depth gauge. The depth gauge dial has a glare free face and is clearly marked for fast, accurate readings. Accuracy is .25%, full scale. The air control system has a built-in snubber for reducing pulsating and shock pressure loads to the precision gauges.
- The Diver Pneumo is a valve regulating type with yellow handle and controls the air supply to the pneumo fathometer system.
Amcommand I™ 1-Diver Air Control System: Part Number 8111 Includes
- Hand-Held Push-to-Talk Microphone: Part Number 2405-28
- HP Yoke/Hose Assembly: Part Number 8111-500
- User Manual
Specifications
- Commercial Diver Air Control Specifications
- HP Air Supply Pressure: 500-3000 PSI with standard CGA850 Yoke Connections or 500-4500 PSI with optional 300 Bar DIN Adapter
- HP Inlet Valve: 2 Source Select
- HP Pressure Gauge: 0-5000 psi, Accuracy +/- 1.5% Full Scale
- HP Check Valve: Two Check Valves prevent reverse inlet flow
- Two Input Yokes, with 6ft. high pressure hose whips
- HP Input Filter, in-line: 50 Micron
- HP Pressure Reducing Regulator: Tescom® High Pressure Regulator
- HP Pressure Reducing Regulator Outlet Pressure Range: 0-285 PSI
- HP Regulator Flow Capacity: Cv =.06
- LP Relief Valve: 285 PSI
- LP Output Fitting: O2, 9/16-18 RH oxygen (B size)
- LP Inlet Fitting: #6 JIC
- Hardwire Commercial Diver Communications Specifications
- Power: 110/220VAC 50/60Hz (automatic) with internal/external battery, 12VDC
- Battery Life: 85 Hours (approx)
- Frequency Response: 300 to 4000 Hz
- Audio Power: 20 watts per channel
- Pneumo Specifications
- Pneumo Gauge: 6 Inch Dual Scale 0-250 FSW/76 MSW
- Pneumo Fitting: 02 (37° JIC optional)
- Panel Specifications
- Panel Material: Black polyester powder coated over stainless and aluminum
- Graphics: Red, white and blue silk-screened
2 or 3 Year Extended Warranties are available for this product. Please refer to the Attachments tab for further information on the program and the Accessories tab to purchase them.
- High Pressure Side
- Descriptions
-
Amron has used our extensive experience in building quality life support equipment and put together the finest one commercial diver air control console available today.
The Amcommand I Air Control has both high and low pressure inlet supply connections and can handle two separate 4500PSIG inlet sources. The compact Tescom high flow regulator is user adjustable, allowing the tender to select the commercial diver's outlet air pressure, depending on the commercial diving helmet or band mask requirements. The full size, 6 inch Pneumo air pressure gauge is easy to read with dual FSW/MSW scales and has the highest accuracy rating in the commercial diving industry. Individual shut off valves, check valves, relief valve and 50 micron in-line air filter complete the air control system. The Amcommand I includes a panel-mounted one commercial diver radio that features both 2- and 4-wire communications capability. This 20-watt radio has an extended gel-cell rechargeable battery life, a built-in universal charger, VCR compatible tape record jack and a hand-held microphone. The two 6-foot HP air supply whips are complete with the 'A' style yoke to fit a standard scuba bottle (CGA-850 connection, 3000PSIG max) and internally stored in the lid.***EXTENDED WARRANTIES ARE AVAILABLE FOR THE AMRON AMCOMMAND 1 DIVER - AIR CONTROL / COMMUNICATIONS SYSTEM. PLEASE REFER TO THE BELOW DOCUMENTS TAB FOR FURTHER INFORMATION ON THE PROGRAM.***
- Accesorios
- Attachments
-
2011 Amron International Catalog - Page 32 (Tamaño: 148.6 KB) 2011 Amron International Catalog - Page 33 (Tamaño: 314 KB) Amron Extended Warranty Program (Tamaño: 58.8 KB) Amron Model 8111 One Diver Air Control Manual (Tamaño: 1.6 MB) - Videos
-
Brand Amron International Comunicación Yes Video No - FAQ
-
Product FAQ's
-
¿Cómo puedo cambiar mis dos mangueras de alta presión de conectores yugos a conectores DIN?
Necesitara remover la asamblea del yugo de la asamblea del conector de alta presión. Para remover la asamblea del yugo simplemente tiene que soltar y remover la turca del tornillo que se encuentra al lado del yugo. Ya que lo haya removido tendrá que instalar el nuevo adaptador DIN de 300 bar, numero de parte HAS-300D
-
¿Puedo usar el 40% de gas Nitrox para mi Amcommand II?
Sí, pero no recomendamos que usen mixturas de oxigeno con más del 40%.
-
¿Cómo puedo verificar si tengo un fusil quemado en mi comunicador Amcom II?
Si la unidad esta enchufada a la corriente eléctrica y prendiendo el interruptor no ocasiona que la luz LED se prenda, El fusil probablemente está quemado.
Desconecta la unidad de la corriente eléctrica, remueva los fusibles y verifique la continuidad con un multímetro. Remplace cualquier fusible que no enseñe corriente.
-
¿Debo usar un interruptor de falla cuando opero mi radio atreves de la corriente CA?
Cuando opere su Comunicador de buzo de Amron es crítico que use un interruptor de falla o un transformador de aislamiento por la seguridad del buzo y supervisor en la superficie. Subidas de tensión y Voltaje son comunes al usar corriente CA en los barcos generados localmente o al final de largos cables y pueden exceder más de 1Kvoltio. Las subidas de tensión y voltaje pueden causar que los fusibles, F1 y F2, se fundan en la tarjeta de circuitos del cargador de la batería y en casos extremos dañan el circuito del cargador. El cargador de la batería está diseñado se cierta manera para que en caso de que ocurra una falla no le cause ningún daño al buzo o al supervisor de la superficie. Es extremadamente sugerido que al usar su comunicador de buzos de Amron, un interruptor de corriente o un nivelador de corriente sean usados para controlar la corriente CA.
-
¿Puedo conectar mi comunicador de un buzo a mi computadora para poder grabar el Audio?
Si, necesitaras un cable que te permita conectar el comunicador a tu computadora. También necesitaras que un programa para grabar audio este instalado en tu computadora. En la parte trasera del comunicador se encuentra un jack de RCA Phono (color negro) que proporciona el aislamiento de la comunicación entre el buzo y el supervisor de superficie. Está diseñado para el uso estándar de cualquier grabadora de audio o video con requerimientos tan bajos como 600 Ohms.
-
No tiene artÃculos en su cesta de la compra.
