Launch and Recovery Systems (LARS)

General

• Dimensions stored: 4000 x 2200 x 1300 mm
• Dimensions operational: 5300 x 2200 x 4270 mm (LxWxH)
• 3250 Kg (including clump weight and cage)
• 180 Bar - 42 lpm
• Platform: offshore coated steel - Fe 510 D
• A-frame: offshore coated steel - Fe 510 D
• Control box: stainless steel - AISI 316L
• Electronic control box: stainless steel - AISI 316L (IP66)
• Hydraulic cylinders: offshore coated steel - FE 510 D, hard chrome rods
• Double break man-riding winches, stainless steel – AISI 316L
• Diam. 10mm wire for cage, 85 mtr
• Diam. 8mm wire for clump weight, 170 mtr
• Remote control with 15m armored cable controlling:
  • Cage winch
  • Clump weight
  • Diving cage:
  • Stainless Steel AISI 316L
  • 1250 x 900 x 2300 (LxWxH) Inner dim.
  • 250 Kg Weight
  • 500 Kg Payload
  • 2x fairlead mounted in top of the cage, 100 x 100 (for umbilicals)
  • Security door

• Clump weight:

  • Stainless steel AISI 316L, Synthetic PE top plate
  • 1500 x 300 x 255 (LxWxH)
  • 200 Kg
• Manual, hardcopy and USB
• General arrangement drawings
• Certificates
• 1x Flood light

Main Wire Wench

• Lift capability: 0.75 ton
• Maximum lifing speed: Operator controllable up to 20 m per minute
• Wire diameter: 10 mm non-spin
• Maximum drum wire capacity: 85 m of 10 mm (3 layers)
• Wire supplied length: 80 m
• Drive system: Direct hydraulic

• Braking:

  • Shaft mounted, non-rotating multi disc internal gearbox break
  • Dynamic, hydraulic disc brake
• Fabrication: 85% stainless steel 316L construction. Stainless steel safety guards are fitted as well.
• Spooling: Full stainless steel cable spooling system for perfect spooling of cables.
• Approximate dimensions:
  • Length: 650 mm
  • Width: 500 mm
  • Height: 750 mm
  • Weight: 300 Kg

Guide Wire Winch

• Lift capability: 0.5 ton
• Maximum lifing speed: Operator controllable up to 36 m per minute
• Wire diameter: 8 mm non-spin 170 m of 8 mm (5 layers)
• Wire supplied length: 160 m
• Drive system: Direct hydraulic
• Braking:
  • Shaft mounted, non-rotating multi disc internal gearbox break
  • Dynamic, hydraulic disc brake
• Fabrication: 85% stainless steel 316L construction. Stainless steel safety guards are fitted as well.
• Spooling: Full stainless steel cable spooling system for perfect spooling of cables.
• Aproximate dimensions:
  • Length: 650 mm
  • Width: 500 mm
  • Height: 750 mm
  • Weight: 300 Kg

Hydraulic Power Pack

• Main pressure compensated load sensing pump and motor rated as follows:
  •  11 kw power with a flow of 47 l/min at 180 bar
  • 400V 50hz / 400V 60 hz with IP55 rating
  • Common 60 litre oil reservoir wiht silica gel filler breather
  • Sight glass with level switch
  • Oil filter system 10u filter system

• Secondary fixed displacement load sensing pump and motor rated as follows:
  • 11 kw power with a flow of 47 l/min at 180 bar
  • 400V 50hz / 400V 60 hz with IP55 rating
  • Common 60 liter oil reservoir wiht silica gel filler breather
  • Sight glass with level switch
  • Oil filter system 10u filter system