Hose Fitting Swage DimensionsFitting Part No.Hose SizeJIC FittingBore Gauge SizeSwage Die SizeSwage Down Dimension
MaterialFJFRB104041/4 in.4 JIC0.152 in.12 mm14.50 mm BrassFJFSP206063/8 in.6 JIC0.298 in.19 mm18.90 mm Phosphur Bronze/Brass
Please note the following:
- The swage down dimensions (SDD) shown above are a guide only.
- At all times, unless noted above, the hose fitting should be tested with a ‘Bore Gauge’ to confirm the correct collapse of the Ferrell.
- Due to the core tube material it is not possible to measure a successful swage based on the Ferrule collapse therefore it is necessary to perform the swage based only on the ‘Swage Down Dimension’.
- All hoses must be pressure tested following swaging.
A variety of swivel hose fittings are available on Amron International's umbilicals. These Diveline JIC Swivel Hose Fittings are brass or phosphur bronze/brass and are swaged onto the umbilical hoses at the Amron facility. All connectors are stress-tested before shipping.
Brand Diveline Fitting Type No Video No