Amron International 2823-603 External Battery Charger

Features

• Faster charging than the previous model (less than 3 hours)
• Weighs less than previous model (only 0.2 lbs!)
• Medical grade isolated power supply with a constant current / constant voltage battery charge controller
• Power supply is protected by two 1.5A slow blow fuses
• Internal resettable fuses 
• Surge arrestor with a rate voltage of 470 Volts
• Reverse current protection
• Wider range of operating temperatures (-40 to +70 degrees C)
• European standards compliant

Compatible with

• 1-Diver Amcom I series (2810E)
• 2-Diver Amcom II series Standard (2820A/23)
• 2-Diver Amcom II series Deluxe (2825A/23)
• 2-Diver Amcommand II Air Control System (8225-HP)
• 2-Diver Amcommand II Air Control System with Heating Element (8225-HP-H)
• 2-Diver Amcommand II Air Control System with Dual HP Regulators (8225-HP2)

The improved Amron International 2823-603 External Battery Charger recharges Gel-Cell batteries used in the Amcom Communicators and Amcommand II Air Control Systems that use an external charger.

The Amron International 2823-603 External Battery Charger can be left on charge indefinitely and will not damage the batteries or the communicator. The charger can be used to directly power the unit where AC power is available.

The Amron International 2823-603 External Battery Charger now boasts a medical grade isolated power supply with a constant current / constant voltage battery charge controller and charges a battery in under 3 hours! It also much lighter while featuring resettable fuses, reverse current protection, and handles a wider range of operating temperatures (-40 to +70 degrees C).

Compatible Communicators are listed below in Item Overview tab.