-
Call Us
(877) 462-6700
(760) 208-6500
-
Don't want to call?
-
Service Questions
- Overview
-
WARNING: DO NOT USE THE AMRON AMCOMMAND II 2 DIVER - AIR CONTROL/ COMMUNICATIONS SYSTEM FOR THE FOLLOWING
- Mixed gas commercial diving operations with an oxygen level greater than 40%
- Oxygen or oxygen enriched breathing mixtures above 40%
High Pressure Side
- High air pressure inputs include two color coded (red and blue) SCUBA bottle yokes with six foot air hose whips.
- Each input has a 0-5000PSIG gauge and shut off valve to monitor and switch from one high pressure air source to the other.
- The added safety feature of check valves provide protection against back flow of air from a full tank into an empty when switching high pressure air tanks.
- High pressure air is reduced to low pressure via a Tescom pressure reducing regulator with a pre-regulator in-line 50 micron filter. A 0-400PSIG gauge monitors the output pressure. A relief valve (factory set at 285PSIG) prevents over pressurization.
Low Pressure Side
- Input check valve permits simple switching to back-up high pressure air in the event of low pressure air failure. Back-up high pressure air supply can simply be turned on. Commercial diver umbilical air connection is an oxygen type fitting, controlled by a quarter turn ball valve which permits unrestricted flow.
Hardwire Communications
- The 2-Diver hardwire communicator is powered by two internal rechargeable Gel-cell batteries complete with the Amron external charger and noise canceling hand-held push-to-talk microphone. The PTT mic eliminates the transfer of all topside noise to the commercial divers and improves communications quality.
- System can also be purchased with the 2.4 GHz Wireless Tender Option - provides the tender complete mobility to move around the commercial or search and rescue dive site and still remain in constant contact with commercial divers.
- Also available: Amron Walk & Talk Module - allows the tender to remotely operate unit from up to 25ft. away.
Pneumo (Depth Monitoring) System
- The heart of the pneumo system is the high precision 6 inch depth gauge. The gauge dial has a glare free face and is clearly marked for fast, accurate readings.
- An air low pressure alarm monitors air pressure supplied to the commercial divers and activates an audio alarm alerting the tender of low air pressure conditions. The air pressure switch is preset at 100PSIG and can be manually adjusted to any air pressure between 22.5 and 112PSIG.
Amcommand II™ with Dual Regulators 2-Diver Air ControlSystem: Part Number 8225-HP2 Includes:
- Hand-Held Push-to-Talk Microphone: Part Number 2405-28
- HP Yoke/Hose Assembly Part Number: 8225-500
- External Battery Charger Part Number: 2823-602
- User Manual
Air Control Specifications
- High Pressure Supply Pressure - Standard Unit: 3000 PSIG
- High Pressure Supply with DIN Adapter: 4500 PSIG
- High Pressure Inlet Valve: 2 each source select
- High Pressure Check Valve: 2
- High Pressure Yokes & Whips: 2 each 6 ft. blue and red
- High Pressure Regulator Inlet: 4500 PSIG
- High Pressure Regulator Outlet: 250 PSIG
- High Pressure In Line Filter: 50 micron
- Low Pressure Relief Valve: set 285 PSIG
- Low Pressure Input Fitting: #6 JIC
- Low Pressure Output Fitting: O2
Hardwire Diver Communications
- Operating Voltage: 12 VDC
- Power: 2 each 12VDC Rechargeable Batteries or External Power 12 VDC
- Battery Operating Time: 60 hours (approx)
- Frequency Response: 300Hz to 7.5kHz
- Audio Power: 20 watts
Panel Specs
- Panel Material: Black polyester powder coated over stainless and aluminum
- Graphics: Red, white blue and yellow silk-screened
Specifications
- Dimensions 20 in. W x 14 in. D x 12 in. H (50.8 cm x 35.56 cm x 30.48 cm) with lid closed
- Dimensions 20 in. W x 14 in. D x21 in. H (50.8 cm x 35.56 cm x 53.34 cm) with lid open
- Weight 76 lbs (34.47 kg)
2 or 3 Year Extended Warranties are available for this product. Please refer to the Attachments tab for further information on the program and the Accessories tab to purchase them.
- Descriptions
-
The Amron Amcommand II Two Diver - Air Control/Communications System is a portable, self contained, two diver complete commercial dive system. The Amron Amcommand II 2 Commercial / Rescue Diver - Air Control/Communications System provides all of the operations necessary to monitor and control the commercial diving operation. The Amron Amcommand II 2 Diver - Air Control/Communications System is a central control point for the supply of breathing air to the commercial divers, monitors the commercial divers depth, provides an audio alarm if the commercial divers' air pressure falls below a preset limit, and provides superior hardwire diver communications for two commercial divers and topside personnel.
Easy set-up with high pressure air sources or low pressure air, which greatly extends search and rescue diving capabilities. To use the new Amron Amcommand II 2 Diver - Air Control/Communications System with 4500PSIG inlet air supply, simply change the yoke assembly with the Model SAA5300, 300 BAR DIN adapter. The hardwire diver communications system can be both full duplex or simplex. The optional Wireless Tender provides the tender with freedom around the dive site while staying in constant communication with the divers. The case is extremely strong and durable, constructed of pressure fused fiberglass that provides a convenient, compact, rugged and professional system designed for years of reliable operation.2 or 3 Year Extended Warranties are available for this product. Please refer to the Attachments tab for further information on the program and the Accessories tab to purchase them.
- Parts
-
- Accesorios
-
- Attachments
-
2011 Amron International Catalog - Page 34 (Tamaño: 167.2 KB) 2011 Amron International Catalog - Page 35 (Tamaño: 316.3 KB) Amcommand II Diver Control 8225-HP and 8225-HP2 User Manual (Tamaño: 2 MB) Amron Extended Warranty Program (Tamaño: 58.8 KB) - Videos
-
Brand Amron International Comunicación Yes Video No - FAQ
-
Product FAQ's
-
¿El 8225-HP viene con alguna documentación?
Si, cada unidad viene con su reporte de inspección. Cada manómetro de Pneumo viene con su certificado y calcomanía de calibración.
-
¿El 8225-HP2 cumple con los requerimientos IMCA?
No, los reguladores de alta presión no se dirigen en forma independiente y comparten un colector de aire común.
-
¿Puedo ordenar el manómetro para que enseñe solo MSW?
El manómetro que viene con el 8225-HP y 8225-HP2 muestra los dos, PSI y MSW.
-
¿Puedo usar el 40% de gas Nitrox para mi Amcommand II?
Sí, pero no recomendamos que usen mixturas de oxigeno con más del 40%.
-
¿Cómo puedo verificar si tengo un fusil quemado en mi comunicador Amcom II?
Si la unidad esta enchufada a la corriente eléctrica y prendiendo el interruptor no ocasiona que la luz LED se prenda, El fusil probablemente está quemado.
Desconecta la unidad de la corriente eléctrica, remueva los fusibles y verifique la continuidad con un multímetro. Remplace cualquier fusible que no enseñe corriente.
-
¿Debo usar un interruptor de falla cuando opero mi radio atreves de la corriente CA?
Cuando opere su Comunicador de buzo de Amron es crítico que use un interruptor de falla o un transformador de aislamiento por la seguridad del buzo y supervisor en la superficie. Subidas de tensión y Voltaje son comunes al usar corriente CA en los barcos generados localmente o al final de largos cables y pueden exceder más de 1Kvoltio. Las subidas de tensión y voltaje pueden causar que los fusibles, F1 y F2, se fundan en la tarjeta de circuitos del cargador de la batería y en casos extremos dañan el circuito del cargador. El cargador de la batería está diseñado se cierta manera para que en caso de que ocurra una falla no le cause ningún daño al buzo o al supervisor de la superficie. Es extremadamente sugerido que al usar su comunicador de buzos de Amron, un interruptor de corriente o un nivelador de corriente sean usados para controlar la corriente CA.
-
¿Puedo conectar mi comunicador de un buzo a mi computadora para poder grabar el Audio?
Si, necesitaras un cable que te permita conectar el comunicador a tu computadora. También necesitaras que un programa para grabar audio este instalado en tu computadora. En la parte trasera del comunicador se encuentra un jack de RCA Phono (color negro) que proporciona el aislamiento de la comunicación entre el buzo y el supervisor de superficie. Está diseñado para el uso estándar de cualquier grabadora de audio o video con requerimientos tan bajos como 600 Ohms.
-
No tiene artÃculos en su cesta de la compra.
